解决办法如下：

打开libs目录下的ryConfig.php文件，找到如下一行：

$msie=’/msie\s(7|8\.[0-9]).*(win)/i’;

将它改为：

$msie=’/msie\s(7|8|9\.[0-9]).*(win)/i’;

也就是在原本一行中增加了 |9 字符，最终为：

$msie=’/msie\s(7|8|9\.[0-9]).*(win)/i’;

问题解决。

先试着用网上介绍的方法，刷3.0.0版本的rom，但是依然无法解决问题。

最后，经过多方尝试，最终用以下方法顺利解决此问题：

1. 解开3.0.0版本的rom，找到webos.tar，再解出nova-installer-image-topaz.uImage。把这个文件放到计算机里novacom目录下。

2. 按power+home关机。再按power+volume up进入恢复模式，连接USB。

3. 在电脑命令行下运行：

novacom boot mem:// < nova-installer-image-topaz.uImage

4. 然后在novacom目录里运行novaterm：

novaterm

5. 在novaterm里一步步运行以下代码:

lvm.static vgscan –ignorelockingfailure
lvm.static vgchange -ay –ignorelockingfailure
lvm.static vgremove store
lvm.static vgscan –ignorelockingfailure
lvm.static vgchange -ay –ignorelockingfailure
lvm.static vgcreate -s 8M store /dev/mmcblk0p14
lvm.static vgscan –ignorelockingfailure
lvm.static vgchange -ay –ignorelockingfailure
lvm.static lvcreate -l 71 -i 1 -M y –major 254 –minor 0 -n root store
lvm.static lvcreate -l 8 -i 1 -M y –major 254 –minor 1 -n var store
lvm.static lvcreate -l 2 -i 1 -M y –major 254 –minor 2 -n update store
lvm.static lvcreate -l 3 -i 1 -M y –major 254 –minor 3 -n log store
lvm.static lvcreate -l 32 -i 1 -M y –major 254 –minor 4 -n mojodb store
lvm.static lvcreate -l 17 -i 1 -M y –major 254 –minor 5 -n filecache store
lvm.static lvcreate -l 3523 -i 1 -M y –major 254 –minor 6 -n media store
lvm.static lvcreate -l 64 -i 1 -M y –major 254 –minor 7 -n swap store
lvm.static vgscan –ignorelockingfailure
lvm.static vgchange -ay –ignorelockingfailure
mkdosfs -f 1 -s 64 /dev/store/media

6. 完成后再按power+volume up进入恢复模式，连接USB用webos doctor就刷机成功了。

参见http://www.webos-internals.org/wiki/How_To_Recover

如果要修改程序的话，要修改的地方很多，在这里介绍一个网上看到的简单解决的办法：

1.在Joomla的mysql数据库中，找到数据表`jos_vm_state`

2.将state_2_code栏目的值有2改为3，保存

3.在virtuemart组件中将省份的2位代码输入省名

这样，订单里面的省份就会显示为完整的省名。

在网上找到一篇文章介绍了如下解决办法，试用成功，何大家分享一下。

大家用得好，给原作者发封感谢信吧。

——————————————————————————————–

Success,

Here is a work around solution that will allow you to offer a flat rate shipping charge for the first item plus a fixed cost for each additional item. This solution allows you to create different pricing rules for individual carriers. Different pricing rules by shipping method. Different pricing rules for specific locations. It can used to create simple flat rate policies. And it can be used to offer free shipping to specific locations.

Say you wanted to charge the following shipping fees:
UPS Ground $5.95 1st item + $2.00 ea. add’l item (USA only)
UPS Flate Rate $14.95 (International only)
USPS Priority Mail $5.00 1st item + $1.20 ea. add’l item (USA + International)
USPS Book Rate $3.50 1st item + $ .75 ea. add’l item (USA + International)
Free Shipping to customers in your city

Summary:
This solution uses VM’s Standard Shipping Module. You only need to add “one” additional line of code to standard_shipping.php then use the standard VM “Shipping / Create a Shipping Rate” to create multiple “flat rate + additional cost” or multiple flat rate shipping policies or multiple location based free shipping.

Edit the file:
/your_site_root/administrator/components/com_virtuemart/classes/shipping/standard_shipping.php

Locate the following section:
$total_shipping_handling = $dbr->f( “shipping_rate_value” ) + $dbr->f( “shipping_rate_package_fee” ) ;
$total_shipping_handling = $GLOBALS['CURRENCY']->convert( $total_shipping_handling ) ;
$total_shipping_handling *= $taxrate ;
$show_shipping_handling = $CURRENCY_DISPLAY->getFullValue( $total_shipping_handling ) ;

Add/Insert the following line indicated in red:
$total_shipping_handling = $dbr->f( “shipping_rate_value” ) + $dbr->f( “shipping_rate_package_fee” ) ;
$total_shipping_handling = $GLOBALS['CURRENCY']->convert( $total_shipping_handling ) ;
$total_shipping_handling *= $taxrate ;
$total_shipping_handling = $d["zone_qty"] * $dbr->f( “shipping_rate_value” ) + $dbr->f( “shipping_rate_package_fee” ) ;
$show_shipping_handling = $CURRENCY_DISPLAY->getFullValue( $total_shipping_handling ) ;

How this new line of code works:
This work around solution uses the number of items in the shopping cart as the “cost for each additional item” and adds a fixed base amount. The fixed base amount is added to the total to create the “cost for the first item”.

So if you wanted to charge $5.95 for the 1st item + $2.00 ea. add’l item. the math is ((quantity of items in cart * 2.00) + $3.95)

Say you only have one item in the cart, the math is: ((1*2.00)+3.95)= $5.95, or, the cost for your first item.

Now lets say that you have three items in your cart, the math is: ((3*2.00)+3.95)= $9.95, or, $5.95 for the 1st item plus $2.00 ea. for the 2 additional items.

If you wanted to charge a flat rate of $14.95, the math is ((quantity of items in cart * 0) + $14.95)
If you wanted to offer free shipping for a location, the math is ((quantity of items in cart * 0) + 0)
If you wanted to charge $5.00 for the 1st item + $ 1.20 ea. add’l item. the math is ((quantity of items in cart * 1.20) + $3.80)
If you wanted to charge $3.50 for the 1st item + $ .75 ea. add’l item. the math is ((quantity of items in cart * 0.75) + $2.75)

How you configure it in VM:
1) Enable Standard Shipping under “Admin / Configuration / Shipping” make sure that the Standard Shipping Module is checked.

2) Create a shipping rate under “Shipping / Create a Shipping Rate”

This work around solution changes the definition or purpose of the fields “Fee:” and “Your package fee:”. “Fee:” is now the multiplier to “items in cart” and “Your package fee:” is now the added fixed base amount.

The above formula is now: ((items in cart * Fee:) + Your package fee:)

As in the above examples, if you wanted to charge $5.95 for the 1st item + $2.00 ea. add’l item. Enter the following:
Fee: 2.00
Your package fee: 3.95

If you wanted to charge a single Flat Rate fee of $14.95, enter:
Fee: 0.00
Your package fee: 14.95
- This works because “items in cart” * 0 = 0, then the “Your package fee:” is added. Providing you with a fixed amount flat rate.

As in the above examples, if you wanted to charge $5.00 for the 1st item + $1.20 ea. add’l item. Enter the following:
Fee: 1.20
Your package fee: 3.80

If you wanted to offer free shipping to a specific zone, zip, city, state or country. Specify the zip code range of a zone, city, or state. To specify a country, select it from the country list. Then enter the following:
Fee: 0.00
Your package fee: 0.00

You can create multiple combinations of the above shipping rates with this solution. Just give each shipping rate the appropriate “Shipping rate description:”. e.g. UPS Ground or USPS Priority Mail. Then select the appropriate zip code range and/or country(s) that the shipping rate applies to.

This solution also works with the automatic order confirmation email. The order confirmations will display the ship method that you entered into the rule’s “Shipping rate description:”.

I haven’t needed it yet but I believe that it would be fairly easy to offer free shipping over a specific dollar amount (i.e. $50.00) by using the following logic:
if cart total > 50.00
$total_shipping_handling = 0 ;
else
$total_shipping_handling = $d["zone_qty"] * $dbr->f( “shipping_rate_value” ) + $dbr->f( “shipping_rate_package_fee” ) ;

If you want flat rate shipping only and do not need an additional cost per item. Then enter the following code:
$total_shipping_handling = $dbr->f( “shipping_rate_value” ) + $dbr->f( “shipping_rate_package_fee” ) ;
In this scenario, use the “Fee:” field to enter the amount of your flat rate. This scenario also allows you to use the “Your package fee:” as normal.

Drawbacks to this approach are:
- It breaks the Standard Shipping module. Because it changes the meaning or function of the fields “Fee:” and “Your package fee:” all rules created using Standard Shipping module will be calculated in this way.
- During version upgrades it will be lost when the PHP file is replaced and therefore it will need to be manually coded again.

Note: I am a consultant and I am posting this solution to hopefully generate some business. I can be contacted at dbochenek@compitsol.com for services or consultation.

I hope that this solution is of some use to you.
David

在这里教大家一个不需要修改代码的小技巧来解决这个问题，使搜索结果显示到一个“干净”页面。

1) Menu Manager建立一个不显示的隐藏menu
2) 在这个新menu中建立一个”Search” item
3) 记下这个新建立的Search menu item的ItemID
4) 再去Extensions > Modules > Search模块 （或其它第三方搜索模块），在它的”Set ItemID”参数栏目中输入步骤3记下的itemID

以后，该Joomla网站的搜索结果就会显示到一个“干净”页面了。

去掉该default_form.php文件中的如下代码：

<?php if ($this->params->get( ‘search_areas’, 1 )) : ?>
<?php echo JText::_( ‘Search Only’ );?>:
<?php foreach ($this->searchareas['search'] as $val => $txt) :
$checked = is_array( $this->searchareas['active'] ) && in_array( $val, $this->searchareas['active'] ) ? ‘checked=”checked”‘ : ”;
?>
<input type=”checkbox” name=”areas[]” value=”<?php echo $val;?>” id=”area_<?php echo $val;?>” <?php echo $checked;?> />
<label for=”area_<?php echo $val;?>”>
<?php echo JText::_($txt); ?>
</label>
<?php endforeach; ?>
<?php endif; ?>

问题解决。

登录Joomla网站后台，在Virtuemart组件中，点取Shopper->List Shopper Groups，选取使用的Shopper Groups，取消”Show Prices including tax”前面的勾选，即可。

如果想把这句换替换成自己的欢迎词，方法如下：

1. 编辑<root>/language/en-GB（其它语言类推）目录下的”en-GB.com_user.ini”文件；

2. 将该文件中的”You may now log in.”修改成自己的欢迎词即可。

解决办法为：

进入网站后台， 进行如下操作

Joomla全局配置菜单 (Site > Global Configuration > Server页)
修改’Database type’ 从 mysql 改为 mysqli

问题即解决。

注意： 在做该操作前，先去菜单: Help > System Info > PHP Information 页面看是否Mysqli模组在PHP环境中是否是enabled的

去掉该logo标志的方法如下：    * 登录进入joomla administrator后台
    * 进入Virtuemart组件
    * 选择Virtuemart Admin下的Configuration菜单
    * 选择Configuration页面的Site子页面
    * 去掉’Show footer’前方的勾号

问题解决。